Air/Oil Separator 2902021980

2902021980 is a high-efficiency built-in coalescing oil-gas separator core (Separator Kit) specially designed for industrial oil-injected screw air compressors.

It is mainly installed inside the oil-gas separation tank, used to condense and separate micron-sized oil mist in compressed air at the final stage. It is a core consumable that determines the cleanliness of the air discharged by the air compressor and the oil return efficiency of the system lubricating oil.

Vantaggi e caratteristiche del prodotto

• Ultra-high separation efficiency (residual oil content ≤ 3 ppm):

Rated filtration precision up to 3 microns Oxfil. Under standard operating pressure, the residual oil content in exhaust gas can be strictly controlled within 3 mg/m³, effectively protecting downstream pipelines and precision filters.

• Low pressure drop and energy-saving design (initial pressure drop ≤ 0.02 MPa):

The optimized flow channel structure and glass fiber weaving density ensure an extremely low initial air resistance. This can significantly reduce the energy consumption load of the air compressor and avoid electricity waste caused by excessive resistance of the filter element.

• 12-hole heavy-duty metal flange structure:

Equipped with a reinforced 12-hole upper flange Oxfil with a diameter of 260 mm. It features high compressive strength and is resistant to deformation and leakage under frequent airflow impact and pressure alternation.

• Dual anti-static safety protection:

Conductive static pins are built between the filter element flange and the metal mesh. Together with the attached anti-static sealing gasket, it can effectively discharge static electricity generated by friction of high-speed airflow and eliminate the risk of explosion and combustion accidents inside the oil-gas barrel caused by static sparks.